This is the latest recevied telemetry packets stored in our database for station/object OK1OBR-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789363674 | 858 Count | 373 Count | 184 Count | 0 VDC | 0 VDC |
| 1789361870 | 853 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789360066 | 852 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789358263 | 851 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789356459 | 850 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789354655 | 849 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789352851 | 848 Count | 369 Count | 180 Count | 0 VDC | 0 VDC |
| 1789351095 | 847 Count | 368 Count | 180 Count | 0 VDC | 0 VDC |
| 1789349289 | 846 Count | 368 Count | 180 Count | 0 VDC | 0 VDC |
| 1789347485 | 845 Count | 367 Count | 180 Count | 0 VDC | 0 VDC |
| 1789345681 | 844 Count | 367 Count | 180 Count | 0 VDC | 0 VDC |
| 1789343877 | 843 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789342073 | 842 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789340270 | 841 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789338466 | 840 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789336662 | 839 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789334858 | 838 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789333054 | 837 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789331250 | 836 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789329500 | 835 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789327696 | 834 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789325893 | 833 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789324089 | 832 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789322285 | 831 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
| 1789320481 | 830 Count | 366 Count | 180 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)