This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792524496 | 0 Count | 957 Count | 0 Count | 0 VDC | 0 VDC |
| 1792523536 | 0 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1792522576 | 0 Count | 908 Count | 0 Count | 0 VDC | 0 VDC |
| 1792521616 | 0 Count | 881 Count | 0 Count | 0 VDC | 0 VDC |
| 1792520656 | 0 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1792519695 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1792518735 | 0 Count | 801 Count | 0 Count | 0 VDC | 0 VDC |
| 1792517775 | 0 Count | 780 Count | 0 Count | 0 VDC | 0 VDC |
| 1792516815 | 0 Count | 735 Count | 0 Count | 0 VDC | 0 VDC |
| 1792515855 | 0 Count | 711 Count | 0 Count | 0 VDC | 0 VDC |
| 1792514895 | 0 Count | 685 Count | 0 Count | 0 VDC | 0 VDC |
| 1792513935 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1792512975 | 0 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1792512015 | 0 Count | 528 Count | 0 Count | 0 VDC | 0 VDC |
| 1792511535 | 0 Count | 502 Count | 0 Count | 0 VDC | 0 VDC |
| 1792510575 | 0 Count | 455 Count | 0 Count | 0 VDC | 0 VDC |
| 1792509615 | 0 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1792508655 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1792507695 | 0 Count | 325 Count | 0 Count | 0 VDC | 0 VDC |
| 1792506735 | 0 Count | 266 Count | 0 Count | 0 VDC | 0 VDC |
| 1792505775 | 0 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1792504815 | 0 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1792503855 | 0 Count | 59 Count | 0 Count | 0 VDC | 0 VDC |
| 1792502895 | 0 Count | 1029 Count | 0 Count | 0 VDC | 0 VDC |
| 1792501935 | 0 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)