This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791573558 | 0 Count | 684 Count | 0 Count | 0 VDC | 0 VDC |
| 1791572658 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1791571758 | 0 Count | 631 Count | 0 Count | 0 VDC | 0 VDC |
| 1791570858 | 0 Count | 601 Count | 0 Count | 0 VDC | 0 VDC |
| 1791569958 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1791569058 | 0 Count | 552 Count | 0 Count | 0 VDC | 0 VDC |
| 1791568158 | 0 Count | 517 Count | 0 Count | 0 VDC | 0 VDC |
| 1791567258 | 0 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1791566358 | 0 Count | 469 Count | 0 Count | 0 VDC | 0 VDC |
| 1791565458 | 0 Count | 442 Count | 0 Count | 0 VDC | 0 VDC |
| 1791564558 | 0 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1791564314 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1791563414 | 0 Count | 366 Count | 0 Count | 0 VDC | 0 VDC |
| 1791562514 | 0 Count | 336 Count | 0 Count | 0 VDC | 0 VDC |
| 1791561614 | 0 Count | 298 Count | 0 Count | 0 VDC | 0 VDC |
| 1791560710 | 0 Count | 262 Count | 0 Count | 0 VDC | 0 VDC |
| 1791559810 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1791558910 | 0 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1791558010 | 0 Count | 160 Count | 0 Count | 0 VDC | 0 VDC |
| 1791557110 | 0 Count | 136 Count | 0 Count | 0 VDC | 0 VDC |
| 1791556210 | 0 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1791555310 | 0 Count | 81 Count | 0 Count | 0 VDC | 0 VDC |
| 1791554410 | 0 Count | 56 Count | 0 Count | 0 VDC | 0 VDC |
| 1791553510 | 0 Count | 25 Count | 0 Count | 0 VDC | 0 VDC |
| 1791552609 | 0 Count | 1019 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)