This is the latest recevied telemetry packets stored in our database for station/object SR8MBR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787576746 | 126 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1787573146 | 444 Count | 1105 Count | 0 Count | 0 VDC | 0 VDC |
| 1787569545 | 324 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1787565944 | 197 Count | 515 Count | 0 Count | 0 VDC | 0 VDC |
| 1787562347 | 76 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1787558746 | 531 Count | 1202 Count | 0 Count | 0 VDC | 0 VDC |
| 1787555145 | 404 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1787551544 | 239 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1787547944 | 145 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1787544343 | 76 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1787540745 | 428 Count | 1130 Count | 0 Count | 0 VDC | 0 VDC |
| 1787537145 | 325 Count | 878 Count | 0 Count | 0 VDC | 0 VDC |
| 1787533544 | 249 Count | 736 Count | 0 Count | 0 VDC | 0 VDC |
| 1787529943 | 163 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1787526342 | 62 Count | 208 Count | 0 Count | 0 VDC | 0 VDC |
| 1787522742 | 4 Count | 2 Count | 0 Count | 0 VDC | 0 VDC |
| 1787519144 | 249 Count | 828 Count | 0 Count | 0 VDC | 0 VDC |
| 1787515543 | 186 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1787511943 | 128 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1787508342 | 61 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1787504741 | 279 Count | 1020 Count | 0 Count | 0 VDC | 0 VDC |
| 1787501140 | 216 Count | 809 Count | 0 Count | 0 VDC | 0 VDC |
| 1787497543 | 133 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1787493942 | 70 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
| 1787490341 | 371 Count | 1188 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)