This is the latest recevied telemetry packets stored in our database for station/object SP2PA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765491536 | 304 Count | 388 Count | 30 Count | 0 VDC | 0 VDC |
| 1765489735 | 303 Count | 385 Count | 30 Count | 0 VDC | 0 VDC |
| 1765487934 | 302 Count | 383 Count | 30 Count | 0 VDC | 0 VDC |
| 1765486133 | 301 Count | 377 Count | 30 Count | 0 VDC | 0 VDC |
| 1765484332 | 300 Count | 377 Count | 30 Count | 0 VDC | 0 VDC |
| 1765482543 | 299 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765480742 | 298 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765478941 | 297 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765477140 | 296 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765475339 | 295 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765473537 | 294 Count | 376 Count | 30 Count | 0 VDC | 0 VDC |
| 1765471736 | 293 Count | 375 Count | 30 Count | 0 VDC | 0 VDC |
| 1765469935 | 292 Count | 372 Count | 30 Count | 0 VDC | 0 VDC |
| 1765468134 | 291 Count | 372 Count | 30 Count | 0 VDC | 0 VDC |
| 1765466333 | 290 Count | 371 Count | 30 Count | 0 VDC | 0 VDC |
| 1765464532 | 289 Count | 369 Count | 30 Count | 0 VDC | 0 VDC |
| 1765462731 | 288 Count | 368 Count | 30 Count | 0 VDC | 0 VDC |
| 1765460941 | 287 Count | 367 Count | 30 Count | 0 VDC | 0 VDC |
| 1765459140 | 286 Count | 367 Count | 30 Count | 0 VDC | 0 VDC |
| 1765457339 | 285 Count | 366 Count | 30 Count | 0 VDC | 0 VDC |
| 1765455539 | 284 Count | 366 Count | 30 Count | 0 VDC | 0 VDC |
| 1765453737 | 283 Count | 366 Count | 30 Count | 0 VDC | 0 VDC |
| 1765451936 | 282 Count | 364 Count | 30 Count | 0 VDC | 0 VDC |
| 1765450135 | 281 Count | 364 Count | 30 Count | 0 VDC | 0 VDC |
| 1765448334 | 280 Count | 362 Count | 30 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)