This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788099204 | 444 Count | 630 Count | 293 Count | 4.12 VDC | 0 VDC |
| 1788097404 | 432 Count | 609 Count | 282 Count | 4.12 VDC | 0 VDC |
| 1788095604 | 421 Count | 584 Count | 272 Count | 4.12 VDC | 0 VDC |
| 1788093802 | 400 Count | 545 Count | 252 Count | 4.11 VDC | 0 VDC |
| 1788092002 | 389 Count | 525 Count | 242 Count | 4.11 VDC | 0 VDC |
| 1788090201 | 367 Count | 491 Count | 221 Count | 4.12 VDC | 0 VDC |
| 1788088401 | 355 Count | 466 Count | 210 Count | 4.12 VDC | 0 VDC |
| 1788086601 | 335 Count | 430 Count | 191 Count | 4.12 VDC | 0 VDC |
| 1788084799 | 319 Count | 399 Count | 176 Count | 4.12 VDC | 0 VDC |
| 1788082999 | 300 Count | 365 Count | 158 Count | 4.12 VDC | 0 VDC |
| 1788081198 | 262 Count | 314 Count | 121 Count | 4.12 VDC | 0 VDC |
| 1788079397 | 253 Count | 296 Count | 113 Count | 4.12 VDC | 0 VDC |
| 1788073999 | 236 Count | 270 Count | 99 Count | 4.12 VDC | 0 VDC |
| 1788072198 | 234 Count | 268 Count | 98 Count | 4.12 VDC | 0 VDC |
| 1788070397 | 232 Count | 266 Count | 97 Count | 4.12 VDC | 0 VDC |
| 1788068597 | 230 Count | 263 Count | 96 Count | 4.11 VDC | 0 VDC |
| 1788066796 | 228 Count | 261 Count | 95 Count | 4.12 VDC | 0 VDC |
| 1788064995 | 226 Count | 259 Count | 94 Count | 4.11 VDC | 0 VDC |
| 1788063195 | 224 Count | 256 Count | 93 Count | 4.11 VDC | 0 VDC |
| 1788061394 | 222 Count | 254 Count | 92 Count | 4.11 VDC | 0 VDC |
| 1788059594 | 219 Count | 251 Count | 90 Count | 4.11 VDC | 0 VDC |
| 1788057793 | 217 Count | 249 Count | 89 Count | 4.11 VDC | 0 VDC |
| 1788055992 | 215 Count | 247 Count | 88 Count | 4.11 VDC | 0 VDC |
| 1788054191 | 213 Count | 245 Count | 87 Count | 4.11 VDC | 0 VDC |
| 1788052391 | 210 Count | 242 Count | 85 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)