This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1776468231 | 221 Count | 422 Count | 201 Count | 4.11 VDC | 0 VDC |
| 1776466430 | 208 Count | 396 Count | 189 Count | 4.11 VDC | 0 VDC |
| 1776464629 | 200 Count | 381 Count | 182 Count | 4.11 VDC | 0 VDC |
| 1776462829 | 189 Count | 359 Count | 172 Count | 4.11 VDC | 0 VDC |
| 1776461029 | 180 Count | 341 Count | 164 Count | 4.11 VDC | 0 VDC |
| 1776459228 | 169 Count | 320 Count | 154 Count | 4.1 VDC | 0 VDC |
| 1776457427 | 160 Count | 305 Count | 146 Count | 4.1 VDC | 0 VDC |
| 1776455627 | 151 Count | 288 Count | 138 Count | 4.11 VDC | 0 VDC |
| 1776453826 | 138 Count | 263 Count | 126 Count | 4.11 VDC | 0 VDC |
| 1776452025 | 127 Count | 242 Count | 116 Count | 4.11 VDC | 0 VDC |
| 1776450224 | 116 Count | 220 Count | 106 Count | 4.11 VDC | 0 VDC |
| 1776448424 | 107 Count | 204 Count | 98 Count | 4.11 VDC | 0 VDC |
| 1776446623 | 96 Count | 184 Count | 88 Count | 4.11 VDC | 0 VDC |
| 1776444824 | 85 Count | 163 Count | 78 Count | 4.11 VDC | 0 VDC |
| 1776443022 | 75 Count | 143 Count | 69 Count | 4.11 VDC | 0 VDC |
| 1776441222 | 64 Count | 122 Count | 59 Count | 4.11 VDC | 0 VDC |
| 1776439421 | 54 Count | 104 Count | 50 Count | 4.11 VDC | 0 VDC |
| 1776437620 | 42 Count | 81 Count | 39 Count | 4.11 VDC | 0 VDC |
| 1776435819 | 31 Count | 60 Count | 29 Count | 4.11 VDC | 0 VDC |
| 1776434021 | 21 Count | 41 Count | 20 Count | 4.11 VDC | 0 VDC |
| 1776432218 | 11 Count | 23 Count | 11 Count | 4.11 VDC | 0 VDC |
| 1776430419 | 539 Count | 1006 Count | 486 Count | 4.11 VDC | 0 VDC |
| 1776428617 | 528 Count | 985 Count | 476 Count | 4.11 VDC | 0 VDC |
| 1776426816 | 518 Count | 966 Count | 467 Count | 4.11 VDC | 0 VDC |
| 1776425016 | 506 Count | 943 Count | 456 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)