This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764936635 | 516 Count | 848 Count | 278 Count | 4.1 VDC | 0 VDC |
| 1764934835 | 513 Count | 843 Count | 276 Count | 4.1 VDC | 0 VDC |
| 1764933034 | 510 Count | 838 Count | 274 Count | 4.11 VDC | 0 VDC |
| 1764931233 | 506 Count | 832 Count | 271 Count | 4.1 VDC | 0 VDC |
| 1764929432 | 503 Count | 827 Count | 269 Count | 4.1 VDC | 0 VDC |
| 1764927631 | 499 Count | 821 Count | 266 Count | 4.11 VDC | 0 VDC |
| 1764925830 | 497 Count | 817 Count | 265 Count | 4.1 VDC | 0 VDC |
| 1764924030 | 493 Count | 811 Count | 262 Count | 4.1 VDC | 0 VDC |
| 1764922229 | 490 Count | 807 Count | 260 Count | 4.11 VDC | 0 VDC |
| 1764920428 | 486 Count | 802 Count | 257 Count | 4.1 VDC | 0 VDC |
| 1764918628 | 483 Count | 797 Count | 255 Count | 4.1 VDC | 0 VDC |
| 1764916827 | 479 Count | 792 Count | 252 Count | 4.11 VDC | 0 VDC |
| 1764915026 | 473 Count | 782 Count | 247 Count | 4.11 VDC | 0 VDC |
| 1764913225 | 469 Count | 775 Count | 244 Count | 4.11 VDC | 0 VDC |
| 1764911425 | 467 Count | 772 Count | 243 Count | 4.11 VDC | 0 VDC |
| 1764909624 | 464 Count | 768 Count | 241 Count | 4.11 VDC | 0 VDC |
| 1764907823 | 462 Count | 765 Count | 240 Count | 4.11 VDC | 0 VDC |
| 1764906023 | 460 Count | 762 Count | 239 Count | 4.1 VDC | 0 VDC |
| 1764904222 | 458 Count | 759 Count | 238 Count | 4.11 VDC | 0 VDC |
| 1764902422 | 456 Count | 756 Count | 237 Count | 4.11 VDC | 0 VDC |
| 1764900621 | 454 Count | 753 Count | 236 Count | 4.11 VDC | 0 VDC |
| 1764898820 | 451 Count | 749 Count | 234 Count | 4.1 VDC | 0 VDC |
| 1764897019 | 449 Count | 747 Count | 233 Count | 4.1 VDC | 0 VDC |
| 1764895218 | 446 Count | 743 Count | 231 Count | 4.11 VDC | 0 VDC |
| 1764893418 | 442 Count | 737 Count | 228 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)