This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782047509 | 865 Count | 666 Count | 429 Count | 0 VDC | 0 VDC |
| 1782046908 | 862 Count | 663 Count | 427 Count | 0 VDC | 0 VDC |
| 1782046308 | 860 Count | 662 Count | 426 Count | 0 VDC | 0 VDC |
| 1782045707 | 858 Count | 660 Count | 425 Count | 0 VDC | 0 VDC |
| 1782045106 | 855 Count | 657 Count | 423 Count | 0 VDC | 0 VDC |
| 1782044505 | 854 Count | 657 Count | 423 Count | 0 VDC | 0 VDC |
| 1782043905 | 852 Count | 655 Count | 422 Count | 0 VDC | 0 VDC |
| 1782043304 | 850 Count | 653 Count | 421 Count | 0 VDC | 0 VDC |
| 1782042703 | 849 Count | 653 Count | 421 Count | 0 VDC | 0 VDC |
| 1782042103 | 847 Count | 651 Count | 420 Count | 0 VDC | 0 VDC |
| 1782041502 | 844 Count | 648 Count | 418 Count | 0 VDC | 0 VDC |
| 1782040901 | 842 Count | 647 Count | 417 Count | 0 VDC | 0 VDC |
| 1782040301 | 840 Count | 645 Count | 416 Count | 0 VDC | 0 VDC |
| 1782039700 | 837 Count | 642 Count | 414 Count | 0 VDC | 0 VDC |
| 1782039100 | 836 Count | 642 Count | 414 Count | 0 VDC | 0 VDC |
| 1782038499 | 834 Count | 640 Count | 413 Count | 0 VDC | 0 VDC |
| 1782037898 | 831 Count | 637 Count | 411 Count | 0 VDC | 0 VDC |
| 1782037298 | 829 Count | 636 Count | 410 Count | 0 VDC | 0 VDC |
| 1782036697 | 827 Count | 634 Count | 409 Count | 0 VDC | 0 VDC |
| 1782036096 | 825 Count | 632 Count | 408 Count | 0 VDC | 0 VDC |
| 1782035496 | 824 Count | 632 Count | 408 Count | 0 VDC | 0 VDC |
| 1782034895 | 822 Count | 630 Count | 407 Count | 0 VDC | 0 VDC |
| 1782034295 | 820 Count | 628 Count | 406 Count | 0 VDC | 0 VDC |
| 1782033694 | 819 Count | 628 Count | 406 Count | 0 VDC | 0 VDC |
| 1782033093 | 817 Count | 626 Count | 405 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)