This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785291184 | 310 Count | 526 Count | 210 Count | 0 VDC | 0 VDC |
| 1785290583 | 308 Count | 521 Count | 209 Count | 0 VDC | 0 VDC |
| 1785289983 | 306 Count | 518 Count | 208 Count | 0 VDC | 0 VDC |
| 1785289382 | 304 Count | 512 Count | 207 Count | 0 VDC | 0 VDC |
| 1785288781 | 302 Count | 507 Count | 206 Count | 0 VDC | 0 VDC |
| 1785288181 | 301 Count | 503 Count | 206 Count | 0 VDC | 0 VDC |
| 1785287580 | 299 Count | 497 Count | 205 Count | 0 VDC | 0 VDC |
| 1785286980 | 297 Count | 492 Count | 204 Count | 0 VDC | 0 VDC |
| 1785286378 | 296 Count | 489 Count | 204 Count | 0 VDC | 0 VDC |
| 1785285777 | 293 Count | 483 Count | 202 Count | 0 VDC | 0 VDC |
| 1785285177 | 291 Count | 477 Count | 201 Count | 0 VDC | 0 VDC |
| 1785284576 | 290 Count | 474 Count | 201 Count | 0 VDC | 0 VDC |
| 1785283976 | 288 Count | 468 Count | 200 Count | 0 VDC | 0 VDC |
| 1785283375 | 286 Count | 462 Count | 199 Count | 0 VDC | 0 VDC |
| 1785282774 | 285 Count | 459 Count | 199 Count | 0 VDC | 0 VDC |
| 1785282173 | 283 Count | 453 Count | 198 Count | 0 VDC | 0 VDC |
| 1785281572 | 280 Count | 445 Count | 197 Count | 0 VDC | 0 VDC |
| 1785280972 | 276 Count | 435 Count | 195 Count | 0 VDC | 0 VDC |
| 1785280371 | 273 Count | 426 Count | 194 Count | 0 VDC | 0 VDC |
| 1785279770 | 270 Count | 417 Count | 193 Count | 0 VDC | 0 VDC |
| 1785279170 | 266 Count | 407 Count | 191 Count | 0 VDC | 0 VDC |
| 1785278569 | 263 Count | 398 Count | 190 Count | 0 VDC | 0 VDC |
| 1785277968 | 260 Count | 389 Count | 189 Count | 0 VDC | 0 VDC |
| 1785277368 | 258 Count | 383 Count | 189 Count | 0 VDC | 0 VDC |
| 1785276767 | 256 Count | 377 Count | 189 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)