This is the latest recevied telemetry packets stored in our database for station/object SM0UQT-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764937286 | 74 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1764936382 | 73 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
| 1764935479 | 72 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1764934576 | 71 Count | 644 Count | 0 Count | 0 VDC | 0 VDC |
| 1764933673 | 70 Count | 639 Count | 0 Count | 0 VDC | 0 VDC |
| 1764932770 | 69 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1764931867 | 68 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1764930963 | 67 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1764930060 | 66 Count | 600 Count | 0 Count | 0 VDC | 0 VDC |
| 1764929157 | 65 Count | 588 Count | 0 Count | 0 VDC | 0 VDC |
| 1764929058 | 64 Count | 587 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1764929007 | 63 Count | 585 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1764928341 | 62 Count | 576 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1764928199 | 61 Count | 573 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1764927574 | 60 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1764927461 | 59 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1764927371 | 58 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1764926465 | 57 Count | 557 Count | 0 Count | 0 VDC | 0 VDC |
| 1764925555 | 56 Count | 546 Count | 0 Count | 0 VDC | 0 VDC |
| 1764924645 | 55 Count | 541 Count | 0 Count | 0 VDC | 0 VDC |
| 1764923740 | 54 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1764922824 | 53 Count | 520 Count | 0 Count | 0 VDC | 0 VDC |
| 1764921915 | 52 Count | 491 Count | 0 Count | 0 VDC | 0 VDC |
| 1764921005 | 51 Count | 488 Count | 0 Count | 0 VDC | 0 VDC |
| 1764920091 | 50 Count | 444 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)