This is the latest recevied telemetry packets stored in our database for station/object SP8SD-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791046505 | 312 Count | 333 Count | 211 Count | 4.22 VDC | 0.14 VDC |
| 1791046204 | 309 Count | 330 Count | 209 Count | 4.22 VDC | 0.16 VDC |
| 1791045903 | 297 Count | 314 Count | 198 Count | 4.22 VDC | 0.14 VDC |
| 1791045602 | 285 Count | 303 Count | 187 Count | 4.22 VDC | 0.16 VDC |
| 1791045302 | 280 Count | 298 Count | 183 Count | 4.22 VDC | 0.16 VDC |
| 1791045001 | 279 Count | 298 Count | 183 Count | 4.22 VDC | 0.16 VDC |
| 1791044700 | 278 Count | 298 Count | 183 Count | 4.22 VDC | 0.16 VDC |
| 1791044400 | 275 Count | 296 Count | 181 Count | 4.22 VDC | 0.16 VDC |
| 1791044099 | 274 Count | 295 Count | 181 Count | 4.22 VDC | 0.14 VDC |
| 1791043798 | 273 Count | 294 Count | 181 Count | 4.22 VDC | 0.16 VDC |
| 1791043497 | 270 Count | 288 Count | 179 Count | 4.22 VDC | 0.14 VDC |
| 1791043197 | 269 Count | 287 Count | 179 Count | 4.22 VDC | 0.16 VDC |
| 1791042896 | 266 Count | 285 Count | 177 Count | 4.22 VDC | 0.16 VDC |
| 1791042595 | 261 Count | 281 Count | 173 Count | 4.22 VDC | 0.14 VDC |
| 1791042295 | 259 Count | 279 Count | 172 Count | 4.22 VDC | 0.16 VDC |
| 1791041994 | 258 Count | 279 Count | 172 Count | 4.21 VDC | 0.14 VDC |
| 1791041693 | 255 Count | 277 Count | 170 Count | 4.22 VDC | 0.14 VDC |
| 1791041392 | 254 Count | 276 Count | 170 Count | 4.22 VDC | 0.16 VDC |
| 1791041092 | 253 Count | 276 Count | 170 Count | 4.21 VDC | 0.14 VDC |
| 1791040790 | 250 Count | 274 Count | 168 Count | 4.22 VDC | 0.14 VDC |
| 1791040490 | 248 Count | 270 Count | 167 Count | 4.22 VDC | 0.16 VDC |
| 1791040189 | 247 Count | 267 Count | 167 Count | 4.22 VDC | 0.16 VDC |
| 1791039888 | 242 Count | 261 Count | 163 Count | 4.21 VDC | 0.14 VDC |
| 1791039587 | 238 Count | 255 Count | 160 Count | 4.22 VDC | 0.16 VDC |
| 1791039287 | 236 Count | 250 Count | 159 Count | 4.22 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)