This is the latest recevied telemetry packets stored in our database for station/object SQ2WSZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792556514 | 267 Count | 731 Count | 217 Count | 0 VDC | 0 VDC |
| 1792555921 | 262 Count | 714 Count | 213 Count | 0 VDC | 0 VDC |
| 1792555312 | 256 Count | 672 Count | 208 Count | 0 VDC | 0 VDC |
| 1792554711 | 247 Count | 618 Count | 200 Count | 0 VDC | 0 VDC |
| 1792554111 | 243 Count | 590 Count | 197 Count | 0 VDC | 0 VDC |
| 1792553510 | 233 Count | 556 Count | 188 Count | 0 VDC | 0 VDC |
| 1792552909 | 226 Count | 537 Count | 182 Count | 0 VDC | 0 VDC |
| 1792552309 | 223 Count | 530 Count | 180 Count | 0 VDC | 0 VDC |
| 1792551708 | 217 Count | 516 Count | 175 Count | 0 VDC | 0 VDC |
| 1792551107 | 210 Count | 500 Count | 169 Count | 0 VDC | 0 VDC |
| 1792550506 | 207 Count | 491 Count | 167 Count | 0 VDC | 0 VDC |
| 1792549906 | 201 Count | 479 Count | 162 Count | 0 VDC | 0 VDC |
| 1792549305 | 195 Count | 464 Count | 157 Count | 0 VDC | 0 VDC |
| 1792548704 | 192 Count | 454 Count | 155 Count | 0 VDC | 0 VDC |
| 1792548129 | 182 Count | 439 Count | 150 Count | 0 VDC | 0 VDC |
| 1792547528 | 175 Count | 422 Count | 144 Count | 0 VDC | 0 VDC |
| 1792546928 | 172 Count | 415 Count | 142 Count | 0 VDC | 0 VDC |
| 1792546327 | 167 Count | 407 Count | 138 Count | 0 VDC | 0 VDC |
| 1792545726 | 161 Count | 394 Count | 133 Count | 0 VDC | 0 VDC |
| 1792545126 | 155 Count | 380 Count | 128 Count | 0 VDC | 0 VDC |
| 1792544525 | 149 Count | 370 Count | 123 Count | 0 VDC | 0 VDC |
| 1792543924 | 142 Count | 354 Count | 117 Count | 0 VDC | 0 VDC |
| 1792543324 | 139 Count | 347 Count | 115 Count | 0 VDC | 0 VDC |
| 1792542723 | 133 Count | 334 Count | 110 Count | 0 VDC | 0 VDC |
| 1792542122 | 124 Count | 316 Count | 102 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)