This is the latest recevied telemetry packets stored in our database for station/object SQ2WSZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783194526 | 175 Count | 401 Count | 149 Count | 0 VDC | 0 VDC |
| 1783193626 | 163 Count | 380 Count | 138 Count | 0 VDC | 0 VDC |
| 1783192725 | 155 Count | 363 Count | 131 Count | 0 VDC | 0 VDC |
| 1783191824 | 149 Count | 346 Count | 126 Count | 0 VDC | 0 VDC |
| 1783190923 | 141 Count | 324 Count | 119 Count | 0 VDC | 0 VDC |
| 1783190023 | 134 Count | 311 Count | 113 Count | 0 VDC | 0 VDC |
| 1783189122 | 126 Count | 288 Count | 106 Count | 0 VDC | 0 VDC |
| 1783188221 | 116 Count | 267 Count | 97 Count | 0 VDC | 0 VDC |
| 1783187321 | 108 Count | 245 Count | 90 Count | 0 VDC | 0 VDC |
| 1783186437 | 98 Count | 229 Count | 85 Count | 0 VDC | 0 VDC |
| 1783185536 | 92 Count | 215 Count | 80 Count | 0 VDC | 0 VDC |
| 1783184636 | 84 Count | 196 Count | 73 Count | 0 VDC | 0 VDC |
| 1783183735 | 75 Count | 178 Count | 65 Count | 0 VDC | 0 VDC |
| 1783182834 | 69 Count | 164 Count | 60 Count | 0 VDC | 0 VDC |
| 1783181934 | 63 Count | 148 Count | 55 Count | 0 VDC | 0 VDC |
| 1783181032 | 56 Count | 132 Count | 49 Count | 0 VDC | 0 VDC |
| 1783180131 | 48 Count | 114 Count | 42 Count | 0 VDC | 0 VDC |
| 1783179231 | 42 Count | 100 Count | 37 Count | 0 VDC | 0 VDC |
| 1783178330 | 35 Count | 83 Count | 31 Count | 0 VDC | 0 VDC |
| 1783177429 | 27 Count | 66 Count | 24 Count | 0 VDC | 0 VDC |
| 1783176528 | 19 Count | 49 Count | 17 Count | 0 VDC | 0 VDC |
| 1783175628 | 13 Count | 33 Count | 12 Count | 0 VDC | 0 VDC |
| 1783174727 | 6 Count | 15 Count | 6 Count | 0 VDC | 0 VDC |
| 1783173826 | 425 Count | 1012 Count | 383 Count | 0 VDC | 0 VDC |
| 1783172925 | 415 Count | 980 Count | 374 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)