This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1792545244 | 4.03 V | 0 V | 112 mW | 29.2 degC | 100800 Pa |
| 1792543485 | 3.93 V | 0 V | 120 mW | 31 degC | 100800 Pa |
| 1792541651 | 4.04 V | 0 V | 130 mW | 30.4 degC | 100862.5 Pa |
| 1792541342 | 4.05 V | 0 V | 184 mW | 34.9 degC | 100850 Pa |
| 1792538052 | 3.91 V | 0 V | 114 mW | 29.4 degC | 100887.5 Pa |
| 1792536384 | 4.04 V | 0 V | 132 mW | 32.3 degC | 100900 Pa |
| 1792535132 | 4.02 V | 0 V | 158 mW | 33.7 degC | 100900 Pa |
| 1792532687 | 4.03 V | 0 V | 118 mW | 30.4 degC | 100912.5 Pa |
| 1792530991 | 4.05 V | 0 V | 124 mW | 31.8 degC | 100912.5 Pa |
| 1792529077 | 3.9 V | 0 V | 122 mW | 30 degC | 100900 Pa |
| 1792527369 | 4.06 V | 0 V | 122 mW | 31.3 degC | 100862.5 Pa |
| 1792525570 | 4.04 V | 0 V | 126 mW | 31.4 degC | 100837.5 Pa |
| 1792523955 | 3.9 V | 0 V | 142 mW | 32.7 degC | 100800 Pa |
| 1792522207 | 4.03 V | 0 V | 140 mW | 32.8 degC | 100775 Pa |
| 1792520188 | 3.93 V | 0 V | 126 mW | 31.9 degC | 100762.5 Pa |
| 1792518398 | 4.03 V | 0 V | 124 mW | 31.9 degC | 100775 Pa |
| 1792516484 | 3.89 V | 0 V | 116 mW | 30.5 degC | 100750 Pa |
| 1792514908 | 3.9 V | 0 V | 140 mW | 32.8 degC | 100762.5 Pa |
| 1792513156 | 4.03 V | 0 V | 138 mW | 33.1 degC | 100762.5 Pa |
| 1792511353 | 4.03 V | 0 V | 138 mW | 33.4 degC | 100762.5 Pa |
| 1792509291 | 4.04 V | 0 V | 114 mW | 30.7 degC | 100800 Pa |
| 1792507582 | 4.05 V | 0 V | 132 mW | 32.5 degC | 100837.5 Pa |
| 1792505923 | 3.9 V | 0 V | 136 mW | 33.8 degC | 100837.5 Pa |
| 1792504053 | 3.92 V | 0 V | 132 mW | 33.8 degC | 100862.5 Pa |
| 1792502307 | 4.03 V | 0 V | 136 mW | 34.1 degC | 100862.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)