This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1781360419 | 3.98 V | 0 V | 228 mW | 33 degC | 101012.5 Pa |
| 1781358482 | 3.98 V | 0 V | 244 mW | 32.2 degC | 100975 Pa |
| 1781354994 | 3.96 V | 0 V | 222 mW | 32.5 degC | 101075 Pa |
| 1781353144 | 3.97 V | 0 V | 234 mW | 32.6 degC | 101100 Pa |
| 1781342353 | 3.98 V | 0 V | 268 mW | 34.2 degC | 101000 Pa |
| 1781340648 | 3.98 V | 0 V | 248 mW | 33.3 degC | 100975 Pa |
| 1781338677 | 3.98 V | 0 V | 212 mW | 32.2 degC | 100925 Pa |
| 1781336906 | 3.98 V | 0 V | 294 mW | 31.6 degC | 100962.5 Pa |
| 1781336889 | 3.98 V | 0 V | 126 mW | 32 degC | 100962.5 Pa |
| 1781336860 | 3.98 V | 0 V | 294 mW | 31.6 degC | 100962.5 Pa |
| 1781336842 | 3.98 V | 0 V | 126 mW | 32 degC | 100962.5 Pa |
| 1781335730 | 3.98 V | 0 V | 248 mW | 32.9 degC | 100937.5 Pa |
| 1781333887 | 3.98 V | 0 V | 232 mW | 31.8 degC | 100937.5 Pa |
| 1781332208 | 3.98 V | 0 V | 244 mW | 32.9 degC | 100950 Pa |
| 1781323112 | 3.97 V | 0 V | 230 mW | 32.4 degC | 100987.5 Pa |
| 1781321283 | 3.98 V | 0 V | 222 mW | 31.4 degC | 101025 Pa |
| 1781319733 | 3.97 V | 0 V | 308 mW | 33.6 degC | 101050 Pa |
| 1781319441 | 3.98 V | 0 V | 248 mW | 32.6 degC | 101062.5 Pa |
| 1781315931 | 3.98 V | 0 V | 238 mW | 32.5 degC | 101187.5 Pa |
| 1781310433 | 3.98 V | 0 V | 188 mW | 29.2 degC | 101300 Pa |
| 1781308635 | 3.98 V | 0 V | 162 mW | 26.3 degC | 101350 Pa |
| 1781306823 | 3.98 V | 0 V | 158 mW | 26.7 degC | 101387.5 Pa |
| 1781305017 | 3.99 V | 0 V | 156 mW | 26.4 degC | 101375 Pa |
| 1781303307 | 3.98 V | 0 V | 162 mW | 28.5 degC | 101375 Pa |
| 1781301422 | 3.98 V | 0 V | 156 mW | 26.8 degC | 101375 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)