This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775188648 | 214 Count | 263 Count | 164 Count | 4.07 VDC | 0 VDC |
| 1775186848 | 212 Count | 261 Count | 163 Count | 4.07 VDC | 0 VDC |
| 1775185047 | 210 Count | 259 Count | 162 Count | 4.07 VDC | 0 VDC |
| 1775183246 | 208 Count | 257 Count | 161 Count | 4.07 VDC | 0 VDC |
| 1775181445 | 206 Count | 255 Count | 160 Count | 4.07 VDC | 0 VDC |
| 1775179645 | 204 Count | 253 Count | 159 Count | 4.07 VDC | 0 VDC |
| 1775177844 | 202 Count | 251 Count | 158 Count | 4.07 VDC | 0 VDC |
| 1775176043 | 200 Count | 249 Count | 157 Count | 4.07 VDC | 0 VDC |
| 1775174242 | 198 Count | 247 Count | 156 Count | 4.07 VDC | 0 VDC |
| 1775172441 | 196 Count | 246 Count | 155 Count | 4.07 VDC | 0 VDC |
| 1775170641 | 194 Count | 244 Count | 154 Count | 4.07 VDC | 0 VDC |
| 1775168840 | 192 Count | 242 Count | 153 Count | 4.07 VDC | 0 VDC |
| 1775167039 | 190 Count | 240 Count | 152 Count | 4.07 VDC | 0 VDC |
| 1775165238 | 164 Count | 204 Count | 127 Count | 4.07 VDC | 0 VDC |
| 1775163438 | 162 Count | 202 Count | 126 Count | 4.06 VDC | 0 VDC |
| 1775161637 | 160 Count | 200 Count | 125 Count | 4.07 VDC | 0 VDC |
| 1775159836 | 158 Count | 198 Count | 124 Count | 4.07 VDC | 0 VDC |
| 1775158035 | 156 Count | 196 Count | 123 Count | 4.07 VDC | 0 VDC |
| 1775156235 | 154 Count | 194 Count | 122 Count | 4.07 VDC | 0 VDC |
| 1775152633 | 150 Count | 190 Count | 120 Count | 4.07 VDC | 0 VDC |
| 1775150832 | 148 Count | 188 Count | 119 Count | 4.06 VDC | 0 VDC |
| 1775149031 | 146 Count | 186 Count | 118 Count | 4.07 VDC | 0 VDC |
| 1775147231 | 144 Count | 184 Count | 117 Count | 4.06 VDC | 0 VDC |
| 1775145430 | 142 Count | 182 Count | 116 Count | 4.06 VDC | 0 VDC |
| 1775143629 | 140 Count | 180 Count | 115 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)