This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783680037 | 762 Count | 760 Count | 399 Count | 4.09 VDC | 0.14 VDC |
| 1783678537 | 757 Count | 756 Count | 398 Count | 4.12 VDC | 0.14 VDC |
| 1783677036 | 736 Count | 732 Count | 381 Count | 4.05 VDC | 0.14 VDC |
| 1783675535 | 680 Count | 629 Count | 328 Count | 4.16 VDC | 0.14 VDC |
| 1783674035 | 632 Count | 538 Count | 283 Count | 4.15 VDC | 0.14 VDC |
| 1783672534 | 603 Count | 506 Count | 258 Count | 4.13 VDC | 0.14 VDC |
| 1783671033 | 599 Count | 503 Count | 257 Count | 4.09 VDC | 0.14 VDC |
| 1783669533 | 594 Count | 500 Count | 256 Count | 4.19 VDC | 0.14 VDC |
| 1783668032 | 564 Count | 467 Count | 230 Count | 4.08 VDC | 0.14 VDC |
| 1783666532 | 511 Count | 409 Count | 180 Count | 4.14 VDC | 0.14 VDC |
| 1783665031 | 507 Count | 405 Count | 179 Count | 4.17 VDC | 0.14 VDC |
| 1783663530 | 467 Count | 364 Count | 143 Count | 4.15 VDC | 0.14 VDC |
| 1783662030 | 463 Count | 362 Count | 142 Count | 4.07 VDC | 0.14 VDC |
| 1783660529 | 458 Count | 358 Count | 141 Count | 4.15 VDC | 0.14 VDC |
| 1783659029 | 454 Count | 355 Count | 141 Count | 4.13 VDC | 0.16 VDC |
| 1783657528 | 450 Count | 352 Count | 140 Count | 4.08 VDC | 0.14 VDC |
| 1783656028 | 446 Count | 349 Count | 139 Count | 4.1 VDC | 0.16 VDC |
| 1783654527 | 441 Count | 345 Count | 138 Count | 4.15 VDC | 0.16 VDC |
| 1783653026 | 437 Count | 342 Count | 137 Count | 4.06 VDC | 0.14 VDC |
| 1783651526 | 432 Count | 338 Count | 136 Count | 4.12 VDC | 0.14 VDC |
| 1783650025 | 428 Count | 335 Count | 136 Count | 4.18 VDC | 0.14 VDC |
| 1783648525 | 424 Count | 332 Count | 135 Count | 4.08 VDC | 0.14 VDC |
| 1783647024 | 420 Count | 328 Count | 134 Count | 4.09 VDC | 0.14 VDC |
| 1783645523 | 415 Count | 324 Count | 133 Count | 4.14 VDC | 0.14 VDC |
| 1783644022 | 411 Count | 321 Count | 132 Count | 4.08 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)