This is the latest recevied telemetry packets stored in our database for station/object DL6YA-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775308929 | 723 C | 4840 % | 8187 hPa | 0 | 0 |
| 1775230217 | 719 C | 5233 % | 8119 hPa | 0 | 0 |
| 1775230156 | 717 C | 5237 % | 8115 hPa | 0 | 0 |
| 1775229794 | 709 C | 4874 % | 8161 hPa | 0 | 0 |
| 1775229760 | 707 C | 4776 % | 8167 hPa | 0 | 0 |
| 1775229745 | 707 C | 4776 % | 8168 hPa | 0 | 0 |
| 1775229676 | 705 C | 4798 % | 8168 hPa | 0 | 0 |
| 1775229642 | 702 C | 4673 % | 8171 hPa | 0 | 0 |
| 1775229627 | 702 C | 4673 % | 8163 hPa | 0 | 0 |
| 1775229611 | 702 C | 4673 % | 8156 hPa | 0 | 0 |
| 1775229596 | 702 C | 4673 % | 8154 hPa | 0 | 0 |
| 1775229507 | 695 C | 4657 % | 8173 hPa | 0 | 0 |
| 1775229491 | 695 C | 4657 % | 8170 hPa | 0 | 0 |
| 1775221126 | 706 C | 3383 % | 8120 hPa | 0 | 0 |
| 1775221111 | 706 C | 3383 % | 8125 hPa | 0 | 0 |
| 1775221086 | 722 C | 4253 % | 8137 hPa | 0 | 0 |
| 1775221071 | 722 C | 4253 % | 8134 hPa | 0 | 0 |
| 1775221038 | 716 C | 4104 % | 8122 hPa | 0 | 0 |
| 1775221023 | 716 C | 4104 % | 8125 hPa | 0 | 0 |
| 1775220945 | 710 C | 4025 % | 8131 hPa | 0 | 0 |
| 1775220724 | 701 C | 3735 % | 8143 hPa | 0 | 0 |
| 1774849731 | 555 C | 6847 % | 8189 hPa | 0 | 0 |
| 1774848828 | 557 C | 6838 % | 8239 hPa | 0 | 0 |
| 1774846117 | 569 C | 6781 % | 8094 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 1, 0
Rel_Hum: 0, 1, 0
Atm_Press: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)