This is the latest recevied telemetry packets stored in our database for station/object SR2LAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793314979 | 216 Count | 400 Count | 208 Count | 0 VDC | 0 VDC |
| 1793311378 | 168 Count | 309 Count | 161 Count | 0 VDC | 0 VDC |
| 1793307776 | 117 Count | 206 Count | 111 Count | 0 VDC | 0 VDC |
| 1793304175 | 56 Count | 98 Count | 51 Count | 0 VDC | 0 VDC |
| 1793300573 | 4 Count | 1 Count | 0 Count | 0 VDC | 0 VDC |
| 1793296980 | 481 Count | 961 Count | 471 Count | 0 VDC | 0 VDC |
| 1793293378 | 389 Count | 814 Count | 380 Count | 0 VDC | 0 VDC |
| 1793289777 | 313 Count | 656 Count | 305 Count | 0 VDC | 0 VDC |
| 1793286175 | 243 Count | 499 Count | 236 Count | 0 VDC | 0 VDC |
| 1793282574 | 171 Count | 354 Count | 165 Count | 0 VDC | 0 VDC |
| 1793278972 | 121 Count | 227 Count | 116 Count | 0 VDC | 0 VDC |
| 1793275379 | 64 Count | 119 Count | 64 Count | 0 VDC | 0 VDC |
| 1793271777 | 484 Count | 1027 Count | 472 Count | 0 VDC | 0 VDC |
| 1793268176 | 435 Count | 939 Count | 424 Count | 0 VDC | 0 VDC |
| 1793264574 | 382 Count | 837 Count | 372 Count | 0 VDC | 0 VDC |
| 1793260973 | 317 Count | 691 Count | 308 Count | 0 VDC | 0 VDC |
| 1793257371 | 266 Count | 570 Count | 258 Count | 0 VDC | 0 VDC |
| 1793253778 | 199 Count | 454 Count | 196 Count | 0 VDC | 0 VDC |
| 1793250176 | 143 Count | 327 Count | 141 Count | 0 VDC | 0 VDC |
| 1793246575 | 97 Count | 203 Count | 96 Count | 0 VDC | 0 VDC |
| 1793242973 | 48 Count | 100 Count | 48 Count | 0 VDC | 0 VDC |
| 1793239372 | 433 Count | 1018 Count | 418 Count | 0 VDC | 0 VDC |
| 1793235770 | 394 Count | 933 Count | 380 Count | 0 VDC | 0 VDC |
| 1793232177 | 344 Count | 832 Count | 335 Count | 0 VDC | 0 VDC |
| 1793228575 | 294 Count | 735 Count | 286 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)