This is the latest recevied telemetry packets stored in our database for station/object GM4ISM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792594715 | 181 Count | 1011 Count | 153 Count | 0 VDC | 0 VDC |
| 1792592912 | 174 Count | 965 Count | 147 Count | 0 VDC | 0 VDC |
| 1792591109 | 167 Count | 925 Count | 141 Count | 0 VDC | 0 VDC |
| 1792589306 | 161 Count | 886 Count | 136 Count | 0 VDC | 0 VDC |
| 1792587503 | 154 Count | 874 Count | 130 Count | 0 VDC | 0 VDC |
| 1792585700 | 147 Count | 841 Count | 124 Count | 0 VDC | 0 VDC |
| 1792583896 | 141 Count | 798 Count | 119 Count | 0 VDC | 0 VDC |
| 1792582093 | 135 Count | 751 Count | 114 Count | 0 VDC | 0 VDC |
| 1792580327 | 128 Count | 708 Count | 108 Count | 0 VDC | 0 VDC |
| 1792578523 | 121 Count | 670 Count | 102 Count | 0 VDC | 0 VDC |
| 1792576720 | 116 Count | 633 Count | 98 Count | 0 VDC | 0 VDC |
| 1792574917 | 110 Count | 599 Count | 93 Count | 0 VDC | 0 VDC |
| 1792573114 | 102 Count | 554 Count | 86 Count | 0 VDC | 0 VDC |
| 1792571311 | 96 Count | 525 Count | 81 Count | 0 VDC | 0 VDC |
| 1792569508 | 90 Count | 491 Count | 76 Count | 0 VDC | 0 VDC |
| 1792567705 | 83 Count | 464 Count | 70 Count | 0 VDC | 0 VDC |
| 1792565902 | 77 Count | 426 Count | 65 Count | 0 VDC | 0 VDC |
| 1792564099 | 72 Count | 394 Count | 61 Count | 0 VDC | 0 VDC |
| 1792562296 | 66 Count | 363 Count | 56 Count | 0 VDC | 0 VDC |
| 1792560493 | 60 Count | 330 Count | 51 Count | 0 VDC | 0 VDC |
| 1792558727 | 55 Count | 299 Count | 47 Count | 0 VDC | 0 VDC |
| 1792556924 | 50 Count | 268 Count | 43 Count | 0 VDC | 0 VDC |
| 1792555120 | 44 Count | 234 Count | 38 Count | 0 VDC | 0 VDC |
| 1792553317 | 38 Count | 200 Count | 33 Count | 0 VDC | 0 VDC |
| 1792551514 | 31 Count | 165 Count | 27 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)