This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 04/17/2025 11:33:37 AM+00:00 | 167 Count | 730 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 10:33:31 AM+00:00 | 165 Count | 709 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 9:33:26 AM+00:00 | 163 Count | 686 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 8:33:20 AM+00:00 | 161 Count | 664 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 8:28:33 AM+00:00 | 160 Count | 664 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 7:26:11 AM+00:00 | 158 Count | 653 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 6:26:05 AM+00:00 | 156 Count | 642 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 5:26:00 AM+00:00 | 154 Count | 631 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 4:25:53 AM+00:00 | 152 Count | 620 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 4:18:49 AM+00:00 | 151 Count | 620 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 3:48:46 AM+00:00 | 150 Count | 613 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 3:18:43 AM+00:00 | 149 Count | 605 Count | 100 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 2:48:40 AM+00:00 | 145 Count | 595 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 2:18:36 AM+00:00 | 144 Count | 591 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 1:48:33 AM+00:00 | 143 Count | 587 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 1:18:30 AM+00:00 | 142 Count | 583 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 12:48:28 AM+00:00 | 141 Count | 579 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/17/2025 12:18:25 AM+00:00 | 140 Count | 575 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 11:48:55 PM+00:00 | 139 Count | 571 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 11:18:52 PM+00:00 | 138 Count | 566 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 10:48:49 PM+00:00 | 137 Count | 561 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 10:18:46 PM+00:00 | 136 Count | 557 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 9:48:42 PM+00:00 | 135 Count | 539 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 9:18:40 PM+00:00 | 134 Count | 519 Count | 97 Count | 0.28 VDC | 0.14 VDC |
| 04/16/2025 8:48:37 PM+00:00 | 133 Count | 512 Count | 97 Count | 0.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)