This is the latest recevied telemetry packets stored in our database for station/object SQ2WIT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792529747 | 173 Count | 318 Count | 163 Count | 0 VDC | 0 VDC |
| 1792528847 | 161 Count | 290 Count | 152 Count | 0 VDC | 0 VDC |
| 1792527945 | 142 Count | 253 Count | 134 Count | 0 VDC | 0 VDC |
| 1792527045 | 123 Count | 222 Count | 116 Count | 0 VDC | 0 VDC |
| 1792526144 | 106 Count | 192 Count | 100 Count | 0 VDC | 0 VDC |
| 1792525243 | 90 Count | 166 Count | 85 Count | 0 VDC | 0 VDC |
| 1792524343 | 74 Count | 136 Count | 70 Count | 0 VDC | 0 VDC |
| 1792523442 | 58 Count | 108 Count | 55 Count | 0 VDC | 0 VDC |
| 1792522541 | 41 Count | 82 Count | 39 Count | 0 VDC | 0 VDC |
| 1792521641 | 28 Count | 62 Count | 27 Count | 0 VDC | 0 VDC |
| 1792520740 | 14 Count | 28 Count | 14 Count | 0 VDC | 0 VDC |
| 1792519839 | 695 Count | 1031 Count | 648 Count | 0 VDC | 0 VDC |
| 1792518939 | 676 Count | 997 Count | 630 Count | 0 VDC | 0 VDC |
| 1792518038 | 662 Count | 976 Count | 617 Count | 0 VDC | 0 VDC |
| 1792517137 | 644 Count | 944 Count | 600 Count | 0 VDC | 0 VDC |
| 1792516237 | 628 Count | 912 Count | 585 Count | 0 VDC | 0 VDC |
| 1792515336 | 608 Count | 869 Count | 566 Count | 0 VDC | 0 VDC |
| 1792514435 | 592 Count | 847 Count | 551 Count | 0 VDC | 0 VDC |
| 1792513535 | 573 Count | 817 Count | 533 Count | 0 VDC | 0 VDC |
| 1792512634 | 548 Count | 778 Count | 509 Count | 0 VDC | 0 VDC |
| 1792511733 | 528 Count | 747 Count | 490 Count | 0 VDC | 0 VDC |
| 1792510833 | 515 Count | 729 Count | 478 Count | 0 VDC | 0 VDC |
| 1792509932 | 488 Count | 691 Count | 452 Count | 0 VDC | 0 VDC |
| 1792509031 | 471 Count | 669 Count | 436 Count | 0 VDC | 0 VDC |
| 1792508146 | 439 Count | 623 Count | 409 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)