APRS Track Direct

My position About ☰

reset

VK3DB-10 Raw Packets

This is the latest recevied packets stored in our database for station/object VK3DB-10. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 >>

1791029988: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH:!LahoFsK/Xa GLoRa APRS|)q!D!!!!!!!!|

1791028185: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH:!LahoFsK/Xa GLoRa APRS|)p!C!!!!!!!!|

1791026385: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH:>System booted at 11:19:44Z TX&RX 433.775MHz 300bps

1791026382: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH:!LahoFsK/Xa GLoRa APRS|)o!B!!!!!!!!|

1791026381: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH::VK3DB-10 :EQNS.0,1,0,0,1,0,0,1,0,0,0.01,0,0,0.02,0

1791026381: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH::VK3DB-10 :UNIT.Count,Count,Count,VDC,VDC

1791026380: VK3DB-10>APLRFD,TCPIP*,qAC,NINTH::VK3DB-10 :PARM.TX,RX,Digi,V_Bat,V_Ext

1791026326: VK3DB-10>APLRFD,TCPIP*,qAC,SECOND:>System booted at 11:18:45Z TX&RX 433.775MHz 300bps

1791026321: VK3DB-10>APLRFD,TCPIP*,qAC,SECOND:!LahoFsK/Xa GLoRa APRS|!?!A!!!!!!!!|

1791026319: VK3DB-10>APLRFD,TCPIP*,qAC,SECOND::VK3DB-10 :EQNS.0,1,0,0,1,0,0,1,0,0,0.01,0,0,0.02,0

1791026319: VK3DB-10>APLRFD,TCPIP*,qAC,SECOND::VK3DB-10 :UNIT.Count,Count,Count,VDC,VDC

1791026318: VK3DB-10>APLRFD,TCPIP*,qAC,SECOND::VK3DB-10 :PARM.TX,RX,Digi,V_Bat,V_Ext

1791026262: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD:>System booted at 11:17:42Z TX&RX 433.775MHz 300bps

1791026259: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD:!LahoFsK/XA GLoRa APRS|(4!@!!!!!!!!|

1791026258: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :UNIT.Count,Count,Count,VDC,VDC

1791026258: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :EQNS.0,1,0,0,1,0,0,1,0,0,0.01,0,0,0.02,0

1791026257: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :PARM.TX,RX,Digi,V_Bat,V_Ext

1791026178: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD:>System booted at 11:16:16Z TX&RX 433.775MHz 300bps

1791026172: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD:!LahoFsK/XA GLoRa APRS|&\!?!!!!!!!!|

1791026171: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :EQNS.0,1,0,0,1,0,0,1,0,0,0.01,0,0,0.02,0

1791026171: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :UNIT.Count,Count,Count,VDC,VDC

1791026170: VK3DB-10>APLRFD,TCPIP*,qAC,THIRD::VK3DB-10 :PARM.TX,RX,Digi,V_Bat,V_Ext

1791026080: VK3DB-10>APLRFD,TCPIP*,qAC,FOURTH:>System booted at 11:14:39Z TX&RX 433.775MHz 300bps

1791026077: VK3DB-10>APLRFD,TCPIP*,qAC,FOURTH:!LahoFsK/X[ GLoRa APRS|'o!>!!!!!!!!|

1791026076: VK3DB-10>APLRFD,TCPIP*,qAC,FOURTH::VK3DB-10 :EQNS.0,1,0,0,1,0,0,1,0,0,0.01,0,0,0.02,0

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: