APRS Track Direct

My position About ☰

reset

KK7CMD Raw Packets

This is the latest recevied packets stored in our database for station/object KK7CMD. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1782108293: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 frustrating {1415

1782108197: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 frustrating {1415

1782108134: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 frustrating {1415

1782108070: KK7CMD>APZ100,SANDFL*,qAR,BALD:@152028z3833.97N/10933.18W>DigiPi WebChat Beacon [Received in wrong order]

1782107126: KK7CMD>APZ100,SANDFL*,qAR,HORNMT:@152012z3833.97N/10933.18W>DigiPi WebChat Beacon [Received in wrong order]

1782107082: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 and you are going where {1410

1782106988: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 and you are going where {1410

1782106925: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 and you are going where {1410

1782106851: KK7CMD>APZ100,SANDFL*,qAR,BALD:@152008z3833.97N/10933.18W>DigiPi WebChat Beacon [Received in wrong order]

1782104502: KK7CMD>APZ100,SANDFL*,qAR,BALD:@152032z3833.97N/10933.18W>DigiPi WebChat Beacon

1782104276: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 you are so sweet {5319

1782104119: KK7CMD>APZ100,SANDFL*,qAR,HORNMT::SMS :@9702095723 you are so sweet {5319

1782103958: KK7CMD>APZ100,SANDFL*,qAR,BALD:@152023z3833.97N/10933.18W>DigiPi WebChat Beacon

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: