APRS Track Direct

My position About ☰

reset

S52X-8 Raw Packets

This is the latest recevied packets stored in our database for station/object S52X-8. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 4 >>

1775136793: S52X-8>APLRT1,WIDE1-1,qAR,S55UGO-10:=/7;zhQvQb[!!Q Bat=3.34V 28%

1775135685: S52X-8>APLRT1,WIDE1-1,qAR,S55UGO-10:=/7<!$QvQX[@yQ Bat=3.35V 29%

1775134207: S52X-8>APLRT1,WIDE1-1,qAR,S55UGO-10:=/7;{YQvS-[B\Q Bat=3.36V 29%

1775133054: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<")QvTp[EzQ Bat=3.38V 31%

1775131308: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"ZQvT%[FhQ Bat=3.43V 35%

1775130391: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"BQvS`[@6Q Bat=3.41V 34%

1775122225: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!XQvQ_[CCQ Bat=3.48V 40%

1775114377: S52X-8>APLRT1,WIDE1-1,qAO,IQ3GO-12:=/7<!zQvTn[CuQ Bat=3.53V 44%

1775113023: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"*QvTX[@uQ Bat=3.53V 44%

1775111216: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!vQvSJ[@xQ Bat=3.55V 45%

1775110266: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<";QvSJ[C(Q Bat=3.55V 45%

1775109208: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"4QvU5[D/Q Bat=3.60V 49%

1775108934: S52X-8>APLRT1,S53UAN-15*,qAR,S55DSN-10:=/7;{OQvZ%[@QQ Bat=3.58V 48%

1775108016: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!cQvS[[>-Q Bat=3.61V 50%

1775107114: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"3QvT@[?FQ Bat=3.62V 51%

1775106176: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<".QvT,[?pQ Bat=3.64V 53%

1775105274: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!kQvTJ[CAQ Bat=3.65V 54%

1775104355: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!zQvSq[?{Q Bat=3.63V 52%

1775104105: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7;{gQvQx[DWQ Bat=3.66V 55%

1775103600: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"@QvTJ[E'Q Bat=3.64V 53%

1775102676: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"CQvTP[BYQ Bat=3.65V 54%

1775102230: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!<QvS9[ABQ Bat=3.67V 55%

1775101327: S52X-8>APLRT1,WIDE1-1,qAO,IQ3GO-12:=/7<"=QvT6[>]Q Bat=3.68V 56%

1775101065: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<$:QvVW[@{Q Bat=3.66V 55%

1775100785: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7;{vQvRC[5.Q Bat=3.68V 56%

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: