APRS Track Direct

My position About ☰

reset

S52X-8 Raw Packets

This is the latest recevied packets stored in our database for station/object S52X-8. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 >>

1775279631: S52X-8>APLRT1,WIDE1-1,qAR,S55UGO-10:=/7<"CQvSq[CNQ Bat=4.05V 87%

1775279359: S52X-8>APLRT1,WIDE1-1,qAR,S55UGO-10:=/7<!jQvUF[>2Q Bat=4.18V 98%

1775279106: S52X-8>APLRT1,WIDE1-1,qAO,S56G-11:=/7<":QvS0[A)Q Bat=4.15V 95%

1775278202: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!vQvST[="Q Bat=4.10V 91%

1775277013: S52X-8>APLRT1,WIDE1-1,qAO,IV3JBF-10:=/7<!kQvSL[C!Q Bat=4.15V 95%

1775276765: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!>QvQG[?BQ Bat=4.12V 93%

1775276518: S52X-8>APLRT1,WIDE1-1,qAO,S56G-11:=/7<!_QvRr[C&Q Bat=4.14V 94%

1775276271: S52X-8>APLRT1,WIDE1-1,qAO,S56G-11:=/7<"eQvTd[B?Q Bat=4.09V 90%

1775276064: S52X-8>APLRT1,WIDE1-1,qAO,IV3JBF-10:=/7<!CQvRR[@3Q Bat=4.09V 90%

1775275817: S52X-8>APLRT1,WIDE1-1,qAO,IQ3GO-12:=/7<"5QvT%[:nQ Bat=4.13V 94%

1775275568: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<#IQvUc[>qQ Bat=4.07V 89%

1775275317: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"%QvSQ[AqQ Bat=4.10V 91%

1775274410: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"$QvSX[B%Q Bat=4.08V 89%

1775273493: S52X-8>APLRT1,WIDE1-1,qAO,IV3JBF-10:=/7<"%QvSx[A/Q Bat=4.15V 95%

1775272586: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"QQvTZ[=TQ Bat=4.14V 94%

1775272333: S52X-8>APLRT1,WIDE1-1,qAO,S56G-11:=/7<!yQvS0[AXQ Bat=4.10V 91%

1775271418: S52X-8>APLRT1,WIDE1-1,qAO,S56G-11:=/7<">QvSg[ASQ Bat=4.14V 94%

1775271173: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!:QvRP[A=Q Bat=4.09V 90%

1775270897: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!qQvU8[;.Q Bat=4.13V 94%

1775270650: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"CQvR'[A7Q Bat=4.16V 96%

1775269741: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!`QvT/[AlQ Bat=4.04V 86%

1775268839: S52X-8>APLRT1,WIDE1-1,qAO,IQ3GO-12:=/7<!9QvS][>AQ Bat=4.12V 93%

1775267936: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!?QvSo[(YQ Bat=4.10V 91%

1775267688: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<!%QvRA[CGQ Bat=4.15V 95%

1775267187: S52X-8>APLRT1,WIDE1-1,qAO,S55G-10:=/7<"OQvSo[A:Q Bat=4.13V 94%

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: