APRS Track Direct

My position About ☰

+−

Connected to APRS feed

42º 41' 6'' N 82º 44' 45'' W
42.68500, -82.74583
EN82PQ

reset

WB8ILI-WX Raw Packets

This is the latest recevied packets stored in our database for station/object WB8ILI-WX. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

05/02/2025 11:15:24 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020714z4241.10N/08244.75W_219/003g003t057r000p046P000h89%b10068

05/02/2025 9:35:22 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020534z4241.10N/08244.75W_207/003g004t056r000p059P000h97%b10058

05/02/2025 7:34:51 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020334z4241.10N/08244.75W_225/002g003t057r000p060P000h97%b10051

05/02/2025 7:24:50 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020324z4241.10N/08244.75W_216/003g004t057r000p060P000h97%b10051

05/02/2025 6:54:20 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020254z4241.10N/08244.75W_219/004g006t057r000p060P000h96%b10047

05/02/2025 6:04:19 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020204z4241.10N/08244.75W_214/002g003t057r000p060P000h98%b10047

05/02/2025 5:54:19 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020154z4241.10N/08244.75W_219/002g003t057r000p060P000h98%b10047

05/02/2025 4:43:48 AM+00:00: WB8ILI>APWW11,WIDE1-1,WIDE2-1,qAo,VE3CTP:;WB8ILI-WX*020039z4241.10N/08244.75W_231/002g003t060r000p060P000h98%b10041

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: