APRS Track Direct

My position About ☰

reset

YD6SVI-3 Raw Packets

This is the latest recevied packets stored in our database for station/object YD6SVI-3. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 4 >>

1785067690: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :PARM.RxTraffic,TxTraffic,RxDrop,RSSI,Voltage

1785067690: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :EQNS.0,1,0,0,1,0,0,1,0,0,-1,0,0,1,0

1785067690: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :UNIT.Pkt,Pkt,Pkt,dBm,V

1785067674: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:>V.4.3d Rx:0 Digi:0 Tx:740 UpTime:30.32

1785067671: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:!0332.37N/09837.88E#APRS IGATE by YD6SVI

1785067020: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :PARM.RxTraffic,TxTraffic,RxDrop,RSSI,Voltage

1785067020: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :UNIT.Pkt,Pkt,Pkt,dBm,V

1785067020: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :EQNS.0,1,0,0,1,0,0,1,0,0,-1,0,0,1,0

1785067005: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:>V.4.3d Rx:0 Digi:0 Tx:736 UpTime:30.21

1785067001: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:!0332.37N/09837.88E#APRS IGATE by YD6SVI

1785066350: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :PARM.RxTraffic,TxTraffic,RxDrop,RSSI,Voltage

1785066350: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :UNIT.Pkt,Pkt,Pkt,dBm,V

1785066350: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :EQNS.0,1,0,0,1,0,0,1,0,0,-1,0,0,1,0

1785066335: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:>V.4.3d Rx:0 Digi:0 Tx:733 UpTime:30.10

1785066331: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:!0332.37N/09837.88E#APRS IGATE by YD6SVI

1785065680: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :UNIT.Pkt,Pkt,Pkt,dBm,V

1785065680: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :PARM.RxTraffic,TxTraffic,RxDrop,RSSI,Voltage

1785065680: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :EQNS.0,1,0,0,1,0,0,1,0,0,-1,0,0,1,0

1785065664: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:>V.4.3d Rx:0 Digi:0 Tx:729 UpTime:29.59

1785065661: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:!0332.37N/09837.88E#APRS IGATE by YD6SVI

1785065010: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :EQNS.0,1,0,0,1,0,0,1,0,0,-1,0,0,1,0

1785065010: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :UNIT.Pkt,Pkt,Pkt,dBm,V

1785065010: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE::YD6SVI-3 :PARM.RxTraffic,TxTraffic,RxDrop,RSSI,Voltage

1785064995: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:>V.4.3d Rx:0 Digi:0 Tx:725 UpTime:29.47

1785064991: YD6SVI-3>AESPG4,TCPIP*,qAC,T2CHILE:!0332.37N/09837.88E#APRS IGATE by YD6SVI

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: