APRS Track Direct

My position About ☰

reset

CA2WKT-1 Raw Packets

This is the latest recevied packets stored in our database for station/object CA2WKT-1. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1770160379: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3O(<K1VaDkQ**LowVoltagePowerOff**

1770160348: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3K:<K1ua!!QQAP 147.600 MHz Bat=3.62V 51%

1770137098: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3MV<K1`aDgQQAP 147.600 MHz Bat=3.63V 52%

1770137077: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3Ps<K2faDlQQAP 147.600 MHz Bat=3.63V 52%

1770137053: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3NR<K4ZaDnQQAP 147.600 MHz Bat=3.68V 56%

1770137028: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3G_<K55aDmQQAP 147.600 MHz Bat=3.68V 56%

1770137011: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3C{<K5kaDsQQAP 147.600 MHz Bat=3.63V 52%

1770136937: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3F(<K@%aETQQAP 147.600 MHz Bat=3.67V 55%

1770136917: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3Cm<KB#aE\QQAP 147.600 MHz Bat=3.67V 55%

1770136901: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3K?<K=naEEQQAP 147.600 MHz Bat=3.67V 55%

1770136882: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3T+<K6baE(QQAP 147.600 MHz Bat=3.63V 52%

1770136826: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3r]<K!zaETQQAP 147.600 MHz Bat=3.64V 53%

1770136811: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3{T<Jv]aEfQQAP 147.600 MHz Bat=3.64V 53%

1770136794: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_4)@<Jp4aEgQQAP 147.600 MHz Bat=3.64V 53%

1770136778: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_4/z<JgnaEUQQAP 147.600 MHz Bat=3.64V 53%

1770136762: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_42b<J_^aE9QQAP 147.600 MHz Bat=3.67V 55%

1770136722: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_4/g<JHHaDRQQAP 147.600 MHz Bat=3.67V 55%

1770136706: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_4/z<JD"aDXQQAP 147.600 MHz Bat=3.65V 54%

1770136495: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3gO<JB4aC{QQAP 147.600 MHz Bat=3.64V 53%

1770136428: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3f,<J8<aD=QQAP 147.600 MHz Bat=3.64V 53%

1770136412: CA2WKT-1>APLRT1,WIDE1-1,qAO,CE2BMA-10:=/_3fu<J4CaDAQQAP 147.600 MHz Bat=3.64V 53%

1770136351: CA2WKT-1>APLRT1,WIDE1-1,qAR,CE2LOH-10:=/_3jF<J1?aDJQQAP 147.600 MHz Bat=3.62V 51%

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: