APRS Track Direct

My position About ☰

reset

DL2ECY Raw Packets

This is the latest recevied packets stored in our database for station/object DL2ECY. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 3 4 >>

1788109050: DL2ECY>APU25N,WIDE1-1,qAO,DB0FRI:=/3F>kPJEA- BGeorg - Wittmund {UIV32N}

1788107901: DL2ECY>APU25N,WIDE2-2,qAR,DB0PDF-10::DK4CN-2 :stimmt , noch keine msg hier angekommen von dir !{02Xx

1788107898: DL2ECY>APU25N,WIDE2-2,qAR,DB0WHV::DK4CN-2 :stimmt , noch keine msg hier angekommen von dir !{02

1788107673: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :was .. du hast stress :-){00

1788107654: DL2ECY>APU25N,WIDE2-2,qAR,DB0PDF-10::DK4CN-2 :stimmt , noch keine msg hier angekommen von dir !{02Xx

1788107647: DL2ECY>APU25N,WIDE2-2,qAR,DB0WHV::DK4CN-2 :stimmt , noch keine msg hier angekommen von dir !{02

1788107628: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :was .. du hast stress :-){00

1788107608: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :wieder aktiv{99

1788107589: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :pinpoint hatte ich letztens auch getestet{01

1788107548: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :pinpoint hatte ich letztens auch getestet{01

1788107533: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :moin{98

1788107507: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :pinpoint hatte ich letztens auch getestet{01

1788107464: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :was .. du hast stress :-){00

1788107423: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :was .. du hast stress :-){00

1788107382: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :was .. du hast stress :-){00

1788107362: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :wieder aktiv{99

1788107321: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :wieder aktiv{99

1788107282: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DK4CN-2 :moin{98

1788107271: DL2ECY>APU25N,WIDE1-1,qAO,DB0FRI:>301627zUI-View32 V2.03

1788099835: DL2ECY>APU25N,WIDE1-1,qAO,DB0FRI:=/3F>kPJEA- BGeorg - Wittmund {UIV32N}

1788099829: DL2ECY>APU25N,WIDE1-1,qAO,DB0FRI:>301423zUI-View32 V2.03

1788099809: DL2ECY>APU25N,WIDE1-1,qAO,DB0FRI:=/3F>kPJEA- BGeorge - Wittmund {UIV32N}

1788095261: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DO2BL-1 :ach so{97

1788095176: DL2ECY>APU25N,WIDE2-2,qAO,DB0FRI::DO2BL :ach so{96

1788094945: DL2ECY>APU25N,WIDE1-1,qAR,DB0WHV:>301301zUI-View32 V2.03

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: