APRS Track Direct

My position About ☰

reset

VK2TBL-6 Raw Packets

This is the latest recevied packets stored in our database for station/object VK2TBL-6. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

<< 1 2 >>

1783635160: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7gKsdp![D6Q Bat=3.10V ( 0%)

1783634257: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7gAsdoh[DhQ Bat=3.22V ( 0%)

1783634134: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7igsdoh[D>Q Bat=3.24V ( 0%)

1783634092: VK2TBL-6>APLRT1,VK2TBL-1*,qAO,VK2TBL-10:=/`7eQsd`Z[D\Q Bat=3.24V ( 0%)

1783634037: VK2TBL-6>APLRT1,VK2TBL-1*,qAO,VK2TBL-10:=/`8&fsd^&[E4Q Bat=3.25V ( 0%)

1783634008: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`84&sd\X[EQQ Bat=3.25V ( 0%)

1783633991: VK2TBL-6>APLRT1,VK2TBL-1*,qAO,VK2TBL-10:=/`81ysdV\[F6Q Bat=3.25V ( 1%)

1783633962: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8/usdQ#[FlQ Bat=3.26V ( 1%)

1783633939: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8$=sdMI[F>Q Bat=3.26V ( 1%)

1783633916: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7tVsdJ?[E]Q Bat=3.26V ( 1%)

1783633893: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7rIsdDf[E5Q Bat=3.27V ( 1%)

1783633869: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8#;sdCV[ECQ Bat=3.27V ( 1%)

1783633846: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8.HsdB;[F!Q Bat=3.27V ( 1%)

1783633791: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8+&sd4i[E<Q Bat=3.27V ( 1%)

1783633728: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8'rsd*<[EAQ Bat=3.28V ( 1%)

1783633665: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8"Mscr/[DXQ Bat=3.28V ( 1%)

1783633602: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`7y3sccH[DPQ Bat=3.30V ( 1%)

1783633579: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8$cscbK[DQQ Bat=3.29V ( 1%)

1783633556: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`80nscc[[DZQ Bat=3.29V ( 1%)

1783633533: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`82lscaN[DaQ Bat=3.30V ( 1%)

1783633510: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`81fscZt[DjQ Bat=3.30V ( 1%)

1783633487: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`8.RscU1[DqQ Bat=3.31V ( 1%)

1783633459: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`82]scVK[DzQ Bat=3.31V ( 1%)

1783633326: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:>https://github.com/richonguzman/LoRa_APRS_Tracker 2025.03.28

1783632837: VK2TBL-6>APLRT1,WIDE1-1,qAO,VK2TBL-10:=/`84WscV$[DoQ Bat=3.48V ( 1%)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: