This is the latest recevied telemetry packets stored in our database for station/object DL7AD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1732239712 | 0 V | 0 V | 200 mW | 0 degC | 500 Pa |
| 1732223678 | 4.46 V | 0 V | 394 mW | 32.3 degC | 98700 Pa |
| 1732223538 | 4.46 V | 0 V | 402 mW | 32.3 degC | 98712.5 Pa |
| 1732223398 | 4.46 V | 0 V | 396 mW | 32 degC | 98712.5 Pa |
| 1732223258 | 4.46 V | 0 V | 394 mW | 32 degC | 98700 Pa |
| 1732223118 | 4.46 V | 0 V | 392 mW | 32.1 degC | 98687.5 Pa |
| 1732222978 | 4.46 V | 0 V | 394 mW | 32.1 degC | 98687.5 Pa |
| 1732222838 | 4.46 V | 0 V | 392 mW | 32.1 degC | 98700 Pa |
| 1732222698 | 4.45 V | 0 V | 398 mW | 32.1 degC | 98687.5 Pa |
| 1732222558 | 4.45 V | 0 V | 394 mW | 32 degC | 98675 Pa |
| 1732222418 | 4.45 V | 0 V | 394 mW | 32.1 degC | 98675 Pa |
| 1732222278 | 4.45 V | 0 V | 392 mW | 32.1 degC | 98675 Pa |
| 1732222138 | 4.45 V | 0 V | 392 mW | 32.2 degC | 98675 Pa |
| 1732221998 | 4.45 V | 0 V | 392 mW | 32.1 degC | 98675 Pa |
| 1732221858 | 4.45 V | 0 V | 394 mW | 32.1 degC | 98675 Pa |
| 1732221718 | 4.45 V | 0 V | 396 mW | 31.8 degC | 98675 Pa |
| 1732221578 | 4.46 V | 0 V | 400 mW | 31.9 degC | 98687.5 Pa |
| 1732221390 | 4.45 V | 0 V | 408 mW | 32.1 degC | 98675 Pa |
| 1732221313 | 4.46 V | 0 V | 392 mW | 32.1 degC | 98675 Pa |
| 1732221234 | 4.45 V | 0 V | 398 mW | 32 degC | 98687.5 Pa |
| 1732221157 | 4.46 V | 0 V | 394 mW | 32 degC | 98675 Pa |
| 1732221077 | 4.46 V | 0 V | 394 mW | 31.8 degC | 98675 Pa |
| 1732220916 | 4.45 V | 0 V | 394 mW | 32 degC | 98675 Pa |
| 1732220838 | 4.45 V | 0 V | 394 mW | 32.1 degC | 98675 Pa |
| 1732220755 | 4.45 V | 0 V | 400 mW | 32 degC | 98675 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)